|
|
|
PorterSIPs by PorterCorp 4240 N. 136th Ave. Holland, MI 49424 800.354.7721 |
|
Transverse Roof & Floor Panel Load Charts Transverse & Axial Wall Load Charts
|
|
General Type "A" SIP Panel 38-001 Panel to Panel w/2x Lumber 38-102 Panel to Panel Floor Joist 38-104 Panel to Panel w/Insul Spline 38-106 Bearing Wall to Joist Multi-Story 38-203 Roof to Wall Beveled Seat 38-301 Roof to Wall Canted Plate 38-302 Roof Ridge w/Solid Blocking 38-303 Cantilever Roof Ridge w/Solid Blocking 38-304 Roof Ridge Connection w/EPS insert 38-306 Roof Eave on Pitched Roof 38-307 Roof to Wall on Gable Roof 38-308 Roof Ridge w/o Solid Blocking 38-312 Single Plate Insulated Headers 38-501 Double Plate Insulated Headers 38-502 Reinforcement of Field-Cut Wall Openings 38-503 |
|
|
|
|
|
When the panel
layout plan is made, the panels are numbered beginning at the back,
right-hand corner of the print, unless noted on the print. Individual
panels are then numbered sequentially in a clockwise direction.
As panels are manufactured they are numbered (marked) to indicate the panel location in the building. The sequence-of-assembly will generally correspond to the number sequence on the panels. As example, wall panels will be marked 1, 2, etc.; floor panels 1F, 2F, etc.; and roof panels 1R, 2R, etc. Panel numbering should be followed so that panels are installed in their correct location.
|
||
|
PorterSIPs by PorterCorp 4240 N. 136th Ave. Holland, MI 49424 800.354.7721 |
 |
Copyright© 2007 PorterCorp All rights reserved
