|
| |
 |
 |
 |
|
Connecting PorterSIPs
panels |
Drawing panels together
Two types of spline connections ( 2x or surface)
are used to interconnect Porter SIPs. To make these connections, it is
necessary to draw or pull the panel being installed together with a
previously installed panel in order to fully engage the connecting spline(s)
in the cavity(s) of the panels.
When panels are drawn
together it is common to have a nominal 1/8" gap between OSB sheeting. The EPS insulation of each
panel should be in contact, with no gap. This assembly process is
occasionally made easier through the use of a ratchet type come-a-long.
|
 |
 |
|
Copyright:
07/26/2006
|
|
