SIPs panel numbering

When the panel layout plan is made, the panels are numbered beginning at the back, right-hand corner of the print, unless noted on the print. Individual panels are then numbered sequentially in a clockwise direction.

As panels are manufactured they are numbered (marked) to indicate the panel location in the building. The sequence-of-assembly will generally correspond to the number sequence on the panels. As example, wall panels will be marked 1, 2, etc.; floor panels 1F, 2F, etc.; and roof panels 1R, 2R, etc. Panel numbering should be followed so that panels are installed in their correct location.

Copyright: 07/26/2006